Conserte seus objetos Comunidade Loja

Lançado em 4 de novembro de 2017. Modelo A1865, A1901. Disponível com GSM ou CDMA / 64 ou 256 GB / Prateado ou Cinza Espacial. (Pronunci-ase com X como número romano, isto é, iPhone X é o mesmo que “iPhone 10”.)

1198 Perguntas Visualizar todos

Opções

iPhone X touch not working ; missing caps and filters

Hello iFixit, I recently received an iPhone X for repair because it had no touch. I inspected the board under the microscope and found out that there are some missing filters and capacitors. As I do not have any donor boards for the caps and filters, I wanted to know is there any way to fix the no touch issue?

The filters and caps missing are :

C5809 (SPI_AP_TO_RACER_MOSI_CONN) ;

FL5891 (PP5V25_TOUCH_VDDH) ;

C5807 (SPI_AP_TO_RACER_SCLK_CONN) ;

FL5860 (HALL2_TO_AOP_IRQ_CONN_L) ;

C5842 (PMU_TO_TOUCH_CLK32K_RESET_CONN_L)

Any help, would be highly appreciated! :)

Update (11/05/2020)

Just need to get the phone’s touch working so If anyone could please help me in what needs to be replaced or jumped :)

Thanks in advance!

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 1
Adicionar um comentário

2 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

You will at least need to replace the filters. Even after replacing the filters you still might not have touch.

How did they become removed to start with?

I would start by checking the touch connector and filter pads for proper diode readings. I would suspect an open line on one of the circuits which will require you to separate the board.

Esta resposta foi útil?

Sim Não
Pontuação 1

4 comentários:

I suspect the previous technician might have somehow gotten the filters to be fallen, i guess he was using a hot air gun to separate the board that might have caused the filters to fall off.

I checked the touch connector where I am getting improper diode reading and the filter pads as well have improper readings.

por

@iammyron07 Next step would be to separate the board and check the pads on the other side.

por

@imicrosoldering Just checked, the pads on both the layers seem fine to me, No ripped pads as such. Really confused with this one.

por

@iammyron07 Take some readings of the corresponding pads on the top layer. This could be a heated CPU.

por

Adicionar um comentário

Opções

If filter is missing you can jump with wire.I also got and iPhone x with track broken fix with lower board swap.If the iPhone was dropped one there must be other issues.After replace filter if still not working try this once iPhone X touch fix by me may helpful for you.

Esta resposta foi útil?

Sim Não
Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

Myron. será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 22

Duração total: 930