Ir para o conteúdo principal

0003 after attempting to reflow

So i have a old 360 from 2008 and it has the red ring and its code was 0102 which is the bad gpu joints and after following this guide on YouTube https://youtu.be/bqSKDluZMmY the rrod has changed to 0003 and its fan only spins for a second

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

The invader 2  0003 is either a dead GPU or no power going to the GPU. It all will depend how you did the “reflow”. Remember, that this is always a hit or miss. Ultimately you’d need a reball and a new IC since it is the actual chip design that causes the failure

Esta resposta foi útil?

Pontuação 0

1 comentário:

Oh i remember reading on a site about the and it mentioned something about the psu no longer working

por

Adicionar um comentário

Adicionar a sua resposta

The invader 2 será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 7

Últimos 30 dias: 18

Duração total: 341