I followed this guide and loosened the logic board with a bent coat hanger (it was really hard to loosen it). After reassembly the Mac Mini doesn’t start at all. I wonder if I’ve damaged the logic board? I’ve disassembled it once more and tested the new SSD in another computer, it works, and reassembled it again, still doesn’t start. I’ve attached a photo of the logic board.
Esta é uma boa pergunta?
Rep: 116
2
I would double check the power connector. From the picture of a small part of the logic board I don’t see anything that I would think would stop normal operation.
Esta resposta foi útil?
Alright, no I don't think there's any problem with the power connector. I think there might be damage on the other side of the logic board perhaps..
Can you try turn it on without HDD/SSD and without cable what is connected to HDD/SSD ?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 72
Hi,
Did you ever get it to work? I have the same problem now.
Thank
por Herman van Heerden