Ir para o conteúdo principal

Model Number A1707. Released June 2017, this MacBook Pro features Kaby Lake processors up to the 2.8 GHz quad-core Intel Core i7 processor with Turbo Boost up to 3.8 GHz.

324 Perguntas Visualizar todos

How to remove screw with stripped screw head?

There’s a 1.3mm T3 that I can’t get out. I read the info on putting solder into the head, but I’m not sure I’ve got the skill to carefully do that.

I’ve tried a rubber band, super glue, and using larger sizes. I think I’ve now got a nice round hole in the screw head.

Any other ideas to try? I’d made it half way through the battery replacement guide when I hit this!

Thanks.

Les

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

2 respostas

Solução escolhida

Finally found a solution. It’s a little less aggressive than using the Dremel, but the same principle.

I went to Home Depot and got a set of precision screwdrivers which contained a 5/64” flat head, and a set of precision files, containing a “3-way” file.

I poked a hole in a piece of paper to fit over the screw and taped it down with some painter’s tape. I then took the file and slowly started to file a groove into the screw head. It took a bit longer than a Dremel would have, but I felt more comfortable using something where I had better control of the cutting speed.

I’m not sure if there was enough to grip if I’d bought the pliers for a go. If they would have worked on the 1.3mm T3, the description of the pliers should contain that.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Consider getting what's called an “easy out" kit for small screws.

These work very well.

Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set Made From H.S.S 4341 With Hardness 63-65hrc. https://www.amazon.com/dp/B07GZ17QD9/ref...

Esta resposta foi útil?

Pontuação 0

1 comentário:

Thanks for responding. I looked at that, but the screw is smaller than what the kit is meant for. Also, to use that I'd need to have a replacement screw, and I don't know where to get that.

por

Adicionar um comentário

Adicionar a sua resposta

Les Hartzman será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 12

Duração total: 2,088