Washer door won't lock (no clicking either) Whirlpool Duet

Side note: my washer, when on spin cycle, is VERY aggressive. It vibrates to the point that the front panel/frame has fallen off several times.

Model No: y wfw9151yw00

Edited to add: I did a diagnostic test and I am getting error codes e1 f9, e2 f5 and f6 e3

During the spin cycle of a wash, the washer tripped the breaker (never happened before). The front panel/frame of washer had come undone (screws fell out). I re-attached the frame, unplugged the washer and flipped the breaker.

Now, on doing another load I am receiving the dL error (e2 f5). At one point I did get the door to lock but received an error code (I think it was f6 e1 - when I looked it up it was related to the communication panel). I have not received that code since.

There is no clicking noise (indicating machine is trying to lock the door) after pressing start on the machine. It just sits there for a couple of minutes and then the error code comes on. I have cleaned out the lock latch, opened the top to see if any wires are loose and it does not appear that way.

Any other suggestions on what to look for? I am desperate to get this working as I work in a hospital and need to sanitize my clothes upon coming into the house with this virus pandemic. I cannot get a technician to come to my house until late next week.