Conserte seus objetos Comunidade Loja

4-inch iPhone released in March 2016 with similar hardware specifications to the 6S. Available in Silver, Space Grey, Gold, or Rose Gold with 16/32/64/128 GB storage options. Model: A1662 and A1723

1049 Perguntas Visualizar todos

Opções

iPhone se touch intermittently unresponsive

I fixed an iphone se from another account by typing in the original password, It does not have a camera, mic or that module with the stuff at the top. other than faint white marks on the screen(it is a water damaged iphone 5s screen) it does not have display problems. The iphone is not slow because when the screen becomes unresponsive i click the home button or lock it and it responds instantly. After a couple of minutes of the screen off the problem is fixed temporarily for about 3-5min. pls help

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas

Opções

Try with a new screen and if the problem is still there probably it’s touch ic chip problem.

Esta resposta foi útil?

Sim Não
Pontuação 0

5 comentários:

i am on a tight budget and it may be a while but ill try to get one, thanks

por

You can get a replacement one from eBay for cheap of course not a original one, but whatever you are getting it to try is the problem from the LCD. You can find a good ones for 15-20$

por

so, i am experienced in soldering, but i dont know the equipment needed to replace the touch ic nor can i find any videos on how to

por

I do have a soldering iron that can microsolder. I watched a video on how to replace a 5S chip and I saw this guy use some brownish substance on his board but i dont know what it is. do i need a heat gun or the substance or can I order the touch ic and fix it?

por

Yes you can order a touch IC to replace. That substance is called a Flux, you need some good one. Because not everyone are good no matter the price. Get Flux - Kalafonia and Isopropyl Alcohol mix a little bit of both to get a good flux for soldering. You need also a heat gun , a tweezers, microscope for better accurate microsoldering, heat tapes.

por

Adicionar um comentário

Adicionar a sua resposta

Brayden S será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 220