Conserte seus objetos Comunidade Loja

2.3GHz, 2.6GHz, or 2.7GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.7GHz) with 6MB shared L3 cache.

561 Perguntas Visualizar todos

Opções

Screen does not turn on after tightening lcd hinge screws

My Macbook does not fully closed so I had to tighten the screws on the lcd hinge. I got that done but after reassembling the macbook there is no display, keyboard backlit or apple logo. I already tried the flashlight trick and nothing shows up in the screen.

Block Image

Block Image

Block Image

I am thinking of replacing the lcd cable. Could that work? I need this fixed real quick as its not mine.

Also the edge is dented so it still does not fully close.

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas

Opções

You may have a couple of issues here. The bottom cover may have shorted things out. For now let’s leave it off. Reforming it may be needed or just replacing it.

You’ll need to find someone to help you here as this is not an easy problem to work through.

Clearly the displays cable is damaged but its likely shorted out the backlight circuit as well. Replacing the display cable won’t fix the damage within the logic board. You might need a new display assembly if it is warped as well.

Esta resposta foi útil?

Sim Não
Pontuação 0

2 comentários:

So i am screwed? Could replacing the cable make the screen show something? I dont really care that much about the blacklight? Also any idea where I could get the parts?

por

Throwing spaghetti at the wall won't cook it!

Where are you located country & major city

por

Adicionar um comentário

Adicionar a sua resposta

Kyle será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 98