Rep: 13
5
Recently replaced my logic board and now my 2009 Mac Pro turns on but I don’t hear a start up chime and no video shows with my original graphics card. I
would try to reset the SMC and PRAM but the USB ports are not working. What can I do? Any ideas?
Esta é uma boa pergunta?
Rep: 13
5
It ended up being the CPUs not properly set in. You have to set the heat sinks a lot tighter than you think you do. After I tightened the heat sinks it boots perfect. No issues!
Esta resposta foi útil?
Rep: 13
1
Hi
I got exactly same problem , mine started after I tried to clean the keyboard
my can turns on fan starts to spin , gpu fan spin too , but nothing on screen and no light on keyboard, looks like usb not responding,
I have changed front panel, I changed power supply,
now I am going to change CPU before planing to change motherboard
please let me know have you managed to fix the problem, and what did you do
regards
Esta resposta foi útil?
Rep: 13
1
Change cpu , just buy cheap like x5660 or x5670 on eBay about £15-20
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 3
Duração total: 205
