Stuck at apple logo
After lcd fpc replacement phone booted fine. Now stuck on apple logo and power supply showing 0.33 amps when button is pressed. Changed tristar and still the same. Any ideas
Esta é uma boa pergunta?
Pontuação
1
607452
1 resposta
Rep: 468
7
1
1
Have you tried a new battery?
Esta resposta foi útil?
Pontuação
0
Doing the same through dcps so doubt it's a battery issue
Is it showing 0.33A on ammeter or DCPS?
por Chris Stables
@imicrosoldering it was but I replaced tigris now when it turns on current goes up and down like booting then spikes to 0.9 the drops and hangs on 0.2 . Replaced tristar 3 times and tigris twice. Dcps
por daniel
Sometimes a Tristar replacement on the IPhone 6s requires an update.
por Chris Stables