Ir para o conteúdo principal

iPhone de quarta geração lançado em 2010. O reparo é simples, mas o vidro frontal e o LCD devem ser substituídos juntos, como uma unidade. GSM / 8, 16 ou 32 GB de capacidade / Modelo A1332 / Preto e Branco.

2375 Perguntas Visualizar todos
Pergunta encerrada

Why my iPhone 4 cannot restore 1618. Stuck in DFU mode?

OK i have an iPhone 4 here. It doesn't boot up, see absolutely nothing on the screen, I have tried Tinyumbrella and it says its in DFU mode, iTunes is saying its in recovery mode and needs to be restored, I've used iReb and it says it is in a Pwned state but whenever i try to restore in iTunes with custom or stock it gets to either the apple or snowbreeze logo on screen and the spinning wheel and says preparing iphone for restore but then just stops with the 1618 error. I've tried reinstalling and basically anything else I can think of, just cant get passed that part of the restore.

Any ideas anyone?

Update

Thank you so much for ur time taken to help me out here. this is just a new phone. the baseband is 04.10.01 since there is no unlock i was trying to restore a custom firmware to try and unlock it and i did not save blobs and when i did the phone went to dfu mode and always there. till this stage. is a brand new phone. i was using pc and it was giving error 3194 now i am using mac bcos i am able to run tss server on tiny umbrella. in windows tss server does not run is grewed out.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

1 comentário:

Has this phone suffered any damage? Have you changed the battery or repaired anything on this phone?

por

Adicionar um comentário

3 respostas

Error 1618 is most commonly due to faulty iTunes. I would re-install iTunes. See if fixed. Maybe try another computer to Restore. If that works then at least the iPhone is not the problem.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Download firmware 4.3.2 or4.3.3 open itune, connect iphone, let itune recognize iphone. hold shift +restore look for the firmware you downloaded and click on it, open+restore.

if not success, try again. hold+shift choose same firmware do same.

Note: pay attention on the iphone serial # to appear, once appear you good to go!

You may still have error 3194 or 1015 which is good.

next step is download redsnow: run program+browse firmware 4.3.2+open, let redsnow recognize it, if good, hit next or install cydia, follow redsnow instruction. you should be good to go.

If 4.3.2 not recognize then try 4.3.3

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

anti virus or fire wall issue

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 6,590