Rep: 13
1
iPad 4 with only 1/2 of the touch screen working. I’ve replaced the digitizer with 2 working touch screens and the problem remains.
Under microscope all the ribbon connections look fine with no signs of damage or lifting.
Is it time to reball the touch ic?
Esta é uma boa pergunta?
Rep: 73
4
2
Touch ic tends to affect the whole screen in my experience. I would suspect the ZIF connector more at this point even if it looks ok under microscope there’s no way to look inside it.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 52
