Ir para o conteúdo principal

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

212 Perguntas Visualizar todos

Missing socket for WiFi antenna cable from iPad Air 2

While prying off old antennae cable from socket during WIFI antennae replacement of iPad Air 2, socket was accidentally removed from board. Is there a replacement part of some way to fix this?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
1 comentário

Could you add a picture or two?

por

Adicionar um comentário

3 respostas

Solução escolhida

There are really two options for this:

  • Order a replacement iPex antenna socket and attempt to solder the replacement to the logic board (I would order a wifi card with the same socket and transfer the connector)
  • Strip back the antenna wires and solder them directly to the logic board.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Thank you so much for this!

Esta resposta foi útil?

Pontuação 0

1 comentário:

I’m having a hard time finding a replacement SOCKET for this. I’m only finding the same piece I’ve already replaced ‘WIFI antenna and GPS ANTENNA FLEX CABLE REPLACEMENT’ which does not include the socket. Do you have any suggestions? Do you have any videos on soldering the wires to the board directly (missing socket)?

por

Adicionar um comentário

I haven’t had success downloading a pic to share.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Mary Jo Webb será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 120