Ir para o conteúdo principal

No Backlight and No Image But Has Power

TV Model: PS59D8000

The TV turns on then it turns off after a short while. If I unplug the black cable to the tcon board as shown in the image below, it turns on and stays on.

Block Image

I have unplugged every other board and it does not stop it from turning off. Nor does it make the backlights work.

I am curious to whether the tcon board is what sends the signal to allow power to the backlight? I know it processes the image, but does it determine whether the backlights receive power? If so, I believe it could be the tcon board, but I am new to this. I also replaced the powerboard with a brand new one, which changed nothing.

Here is the entire TV backpanel:

Block Image

Any help is very much appreciated :)

Part numbers:

Powerboard: BN44-00447A

Main: BN94-04680C

Tcon: LJ41-09448A

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

Interesting I have the same issue with an LG I picked up. Ever got this resolved ?

por

Adicionar um comentário

1 resposta

Pergunta mais útil

@azcam what you are describing sounds like a bad t-con board. The Backlight is actually turned on by the mainboard however, a bad t-con board can prevent the backlight to come on. Try to connect it all back together. Then disconnect the main board form the power board and see if your backlight comes on.

Esta resposta foi útil?

Pontuação 1

2 comentários:

If I disconnect the mainboard from the powerboard, I cant turn the tv on

por

Okay so you will Have to start with the t-con board since your tv stays on with it disconnected

por

Adicionar um comentário

Adicionar a sua resposta

A C será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 9

Duração total: 270