Ir para o conteúdo principal

Lançado em 22 de setembro de 2017. Modelo A1863, A1905. Disponível com GSM ou CDMA / 64 ou 256 GB / Dourado, Prateado e Cinza Espacial.

872 Perguntas Visualizar todos

Water stuck in camera module

My mom recently broke her iphone 8 and decided to get a new one and I fixed the 8 and am now using it as my main driver. The phone had severe water damage and I have since replaced the screen, but water still remains within the actual camera lense on the rear part of the phone. I have taken the camera out and tried drying it with a hair dryer, but the water remains. Is there any way to fix it? Or to buy a new camera?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

2 respostas

Pergunta mais útil

If the glass lens visually looks clean on both the camera and the glass on the iPhone then the rear camera will need to be replaced.

You could try blowing some hot air on the rear camera with a hair dryer for a few seconds and see if that helps.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

If trying the dry the component with the hair dryer didn’t work then it may mean you just need to replace the rear facing camera module. You could try using some isopropyl alcohol (at least 91%) to see if that will displace the water then use the hair dryer again to evaporate the alcohol.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Riley Muir será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 3

Duração total: 923