Ir para o conteúdo principal

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

630 Perguntas Visualizar todos

The correct USE of power supply cable

Hi Everyone.. Hi @refectio Sir..

I have a question just for general knowledge. Sometimes we have a phone for repairing, but dont have a Power Supply cable with right Battery connector.

Suppose this ipad mini 1.

If i want to power the board, how can i connect the power supply red and white cable?

Black one is Ground

But this connector have more then 1 Rails on battery connector :

BATT_SWi_CONN

BATT POS CONN

BATTERY NTC

So where can i solder the RED Wire for give a Power to Board... Thanks

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

Simple solution. Measure where 3.7V-4.2V on a known good charged iPad Mini 1 battery connector pins.

Once you figure out which one is positive and negative match that up with the connector on the board.

Esta resposta foi útil?

Pontuação 2

1 comentário:

@ben Thank u very Much..

por

Adicionar um comentário

Adicionar a sua resposta

AGS será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 51