Rep: 3,9 mil
17
27
7
I changed the screen of and iPhone X for an client.
He sent me an email now saying . “Screen repair is awesome, no faults only issue is back camera and flashlight is not working. Face-ID and front camera is working fine.
First time I had this issue now, same procedure as any other iPhone X repairs I have done.
Anyone know a simple solution to this issue?
Esta é uma boa pergunta?
Rep: 221,4 mil
15
289
807
I would check for pry damage near the FCAM (J4600) connector as it is directly adjacent to the RCAM Zoom connector (J4000). Specifically, check Q3700 as those glass transistors are easily damaged but there are a whole slew of passives surrounding the connectors that could also be damaged.
Esta resposta foi útil?
Cant really see any particular damage here.
can it be damage from the fall of the screen, it was very damaged and not turning on
The other issue with the X is that the logic boards are very thin and flexy. It is probably some cracked solder ball in the RCAM circuit.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 1,718
