Ir para o conteúdo principal

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Perguntas Visualizar todos
Pergunta encerrada

Iphone doesn´t start anymore after display chage

Hello,

i got some small to huge problems. After changin the display my iphone doesn´t start anymore. I took me some weeks to remove the old display and assmble everything. So could this be the problem?

I tried to connect it via usb but nothing happens, also i tried to press and hold the home and on/off button for more than 30 secs.

Nothing happend so far.

Thanks for your help..

Cheers

Jan

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

Mine too dont know what to do now

por

Adicionar um comentário

4 respostas

Solução escolhida

This happened to me.

After replacing the screen, it continually displays the apple.

It appears that the ribbon cable labelled 3 was not correctly in place. Once this was corrected the iPhone runs fine.

Luc.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Sounds to me like one of the many ribbon connectors isn't seated properly. Best dismantle it again and check they are all pressed firmly into place.

Esta resposta foi útil?

Pontuação 0

1 comentário:

even i hv the same problem...i assembled it again but still its not turning on...

por

Adicionar um comentário

this happened to me

i coulld even call the phone and it would ring but i couldnt pick it up

turns out that the top right power button needed cleaning, was a bit dusty

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

even i hv the same problem...i assembled it again but still its not turning on...

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,288