Rep: 635
6
6
1
i have a nintendo switch at my store that isnt charging. i think its a bad resistor because im reading OL and no power is getting past. can someone tell me the proper value for the resistor right next to the number 6 in pic?
Esta é uma boa pergunta?
Rep: 34,6 mil
10
22
44
Have you changed the charging port as that would be more like the problem
Esta resposta foi útil?
problem isnt the charge port. i looked at the inside of the port under a microscope and it looks brand new no bent pins. also i touched up the solder joints on the port to make sure there was no cracks. 5volts is getting to the resistor but 0 on the other side. and it should drop it down to 3.2volt. like i said the resistor is OL and no power is passing. so i know the problem is that component, i just cant find any service literature to find the proper resistance.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 70
