Ir para o conteúdo principal

Versão renovada do iPhone 3G com velocidades de processamento mais rápidas. O reparo deste dispositivo é semelhante ao 3G e requer simples chaves de fenda e ferramentas de abertura. Modelo A1303 / 16 ou 32 GB de capacidade / parte traseira em plástico preto ou branco.

1484 Perguntas Visualizar todos
Pergunta Encerrada

Proximity sensor troubles (Works sometimes, sometimes not)?

Hi,

i've already read the related answers but that doesn't adress my problem. As i stated, the sensor sometimes switches the screen off during a call sometimes not. Hard reset didn't help. The phone was never dismanteled, but has had a hard life (well i use it a lot).

iOS 4.1 (8B117)

Modem Firmware (Baseband) 06.15.00

jailbroken and unlocked.

Any idea?

Respondido! Ver a resposta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 0
Adicionar um comentário

1 Resposta

Solução escolhida

My first guess would be that it's because you have the iPad baseband (6.15.00) installed. Though the dev-team says it's perfectly safe to use, it can cause all kinds of things to go wrong. I would consider looking around on Cydia for a tweek that disables the sensor all-together, or update the phone to a newer version of iOS (If you have saved SHSH blobs) and see if that resolves the problem.

Esta resposta foi útil?

Pontuação 3

Comentários:

Thanks - i reseach into that direction. I'm a bit careful though, because the phone works fine otherwise and i don't want to loose my unlock. +

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,516