Hi,
Due to some misfortune, the logic board in my 13” MacBook Pro is damaged. Since the rest of the system is in perfect shape, I’d like to replace the board. I have a 2.5GHz board, can I replace it with a 2.9GHz board? All would still fit?
Thanks in advance.
With kind regards,
Sjoerd
Esta é uma boa pergunta?
Rep: 479,3 mil
35
329
971
Yes! You can use a better version of the logic board that was used in your systems series.
Here’s the IFIXIT guide to take it out MacBook Pro 13" Unibody Mid 2012 Logic Board Replacement and here’s the needed part from IFIXIT MacBook Pro 13" Unibody (Mid 2012) 2.9 GHz Logic Board
Esta resposta foi útil?
Very fast again Dan, thanks a lot!
Happy to help!
Rep: 11
2
I did this and everything works except the display is black. I’ve used safe mode, disk utility, reset NVRAM, PRAM and tried to download Catalina(36hours - didn’t). Display is still black! Help!
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 172
