Ir para o conteúdo principal

Repair and disassembly guides and support for dish washing appliances.

700 Perguntas Visualizar todos

Removing Bosch SHP65T55UC/02 control module

I’m trying to remove the control module for a Bosch SHP65T55UC/02 dishwasher and I cannot figure out how to remove it. I have the door separated and after slightly bending the 5 top clips back it still won’t budge. Any help would be appreciated!

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

2 respostas

Solução escolhida

the side with the five clips is not the side the control panel is released from…the control panel together with the facia plate is released from the door by undoing the 3 torx 20 screws in the handle (top of recess). once the control panel and facia plate are removed from the door assembly the release tabs highlighted in the attached photo can be accessed...these clips are facing the exterior front panel…lift the clips while gently pushing the panel down (towards the bottom of the machine) and the control panel will fall away from the facia plate.

Block Image

Esta resposta foi útil?

Pontuação 3

1 comentário:

I have this machine. Does anyone know where the thermal fuse is located ?

por

Adicionar um comentário

Hi @jasons1969 ,

Don’t know if this is a help or not but here’s a link to the parts for your dishwasher.

Scroll down the parts diagrams on the left of the page to find the “base assembly” diagram, click to enter and then hover your mouse over the parts diagram to find part #0510 which is the control board.

Hopefully you may be able to work out how it is held in from the diagram.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Jason Van Halen será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 13

Duração total: 1,118