My harddisk on my iMac died, so I replaced it with a new compatible one. But now I have no idea what to do software-wise. Do I need an adapter to upload a OS-version to it first, before installation, or do I upload the software after the installation of the harddisk?
Esta é uma boa pergunta?
Rep: 479,3 mil
35
329
971
Once you get the hardware side of things working you’ll need to create a bootable OS installer drive. I would recommend staying with Sierra on your system, here’s what you’ll need to do from a second Mac system How to create a bootable macOS Sierra installer drive. If you have a good internet connection you could try the OS install from the internet How to start up your Mac in Internet Recovery Mode. As you have a fresh drive you don’t have the recovery partition to work off of.
Esta resposta foi útil?
OWC thermal sensor
@mayer - For sure!
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 57
1 comentário
FYI - You'll also need this with your new drive: OWC In-line Digital Thermal Sensor for iMac 2011 Hard Drive Upgrade
por Dan