Reputação: 1
1
I have replaced the screen a couple of times. The first time I thought it was a dodgy screen so I ordered another and it does the exact same thing. When I press either the power or the home button the home screen appears for a nano second then goes off? Tried reboot via iTunes etc but nothing. Any ideas?
Esta pergunta é pertinente?
Reputação: 5,4 mil
6
11
If you hold a flashlight on the screen, can you see a faint image? If so, it’s your backlight ic going out.
Esta resposta foi útil?
That’s great I’ll check it. Thank you
Reputação: 43
4
Hi,
when you replaced the screen did you desolder the sleep magnetic induction flex and transfer to your new display,
if not this will be the main cause for your problems.
A image of the flex is attached. It’s located at the bottom of the lcd
Esta resposta foi útil?
Reputação: 1
1
Is it this one?
Esta resposta foi útil?
Yes that’s the place where the flex needs soldering back to
Hi I’ve added a video if you have any ideas id really appreciate it
Hi, sorry for the delay been mad busy in work lately. Are you up based ? If you are I would be more than happy to help you out with this.
Also have you gotta picture of the screen with the new flex attached?
Reputação: 1
1
Ok tried this. Bought new part and soldered it on. I’m still getting a nano flash of the screen then nothing…. help?? It’s had new lcd digitizer screen and new flex cable but still the same problem. I can press either the power button or the home button and get the same thing. It’s driving me crazy!
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 74
