Late 2013 iMac (27") screen hinge replacement

Question

iMac Intel 27" EMC 2639

Model A1419 / Late 2013 / 3.2 & 3.4 GHz Core i5 or 3.5 GHz Core i7 Processor, ID iMac14,2

340 Perguntas Visualizar todos

Wayne H @wayne783

Rep: 1

Postado: 17 de jan de 2019

Opções

Late 2013 iMac (27") screen hinge replacement

Does the iFixit forum have their own version of a full step-by-step guide to fixing the broken hinge issue with the late 2013 27” iMacs? I am not looking for a machack fix where you are required to fit an additional clamp between the screen and the stand. I would like to fix the hinge so that the tilt can operate as it should. But at the same time, I do not want to take it to Apple only to be charged an exorbitant price.

Thank you guys!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

3 respostas

Solução escolhida

Dan @danj

Rep: 478,9 mil

Self employed contract worker

35

329

970

Postado: 17 de jan de 2019

Opções

The steps are the same as taking the logic board out. Review this IFIXIT guide iMac Intel 27" EMC 2639 Logic Board Replacement once you get to that point you can see the hinge which is just behind it

Take the foot stand off (nine screws) as well as the stand and then take the hinge its self off. The replacement hinge info: The Book Yard UK - Mac 27" Hinge/Clutch Mechanism (12/13) Apple P/N 923-00151

Esta resposta foi útil?

Sim Não

Pontuação 2

Adicionar um comentário

DarrenG @themacfixer Rep: 135 MacFixer.co.uk 4 3 · Answer 1 · 2019-10-15T03:45:47-07:00

DarrenG @themacfixer

Rep: 135

MacFixer.co.uk

4

3

Postado: 15 de out de 2019

Opções

And just to add there is no need to replace the entire mechanism, the issue is caused by the rubbish plastic washers that secure the end of the spring mechanism. You can replace these with metal ones to fix the issue and prevent it recurring.

Esta resposta foi útil?

Sim Não

Pontuação 1

Adicionar um comentário