Ir para o conteúdo principal

Lançado em 16 de setembro de 2016. Modelo 1660, 1778 Disponível como GSM ou CDMA / 32, 128 ou 256 GB / Ouro Rosa, Dourado, Prateado, Preto Mattte e Preto Brilhoso.

2261 Perguntas Visualizar todos

Unable to Complete Touch ID Setup - Help?

I replaced my iPhone 7 screen with an iFixIt screen. We transferred the home button from the original screen, but when I try to use Touch ID, it says “Unable to Complete Touch ID Setup.” There is no apparent damage to any cables. Does anyone have any advice or has anyone run into this similar problem?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

This means either the home button got damaged or the replacement screen is faulty.

If the old screen still works you can try the home button on that and see if the touch ID works.

Esta resposta foi útil?

Pontuação 4

2 comentários:

Thanks for your response. I'm pretty sure we got a defective screen from ifixit.. The wiring harness from the home button won't snap into the new screen

por

To get it to connect I usually move the home button flex to align it. You'll need to loosen the adhesive behind the button flex so that you can move it while it's not stuck on to the screen.

por

Adicionar um comentário

Adicionar a sua resposta

Austin Taterka será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 425