Opções

Need one replacement (short) screw for bottom cover?

After upgrading RAM, I was replacing the bottom cover, and one of the short screws went flying. Can you tell me the size, and ideally a source?

I see that iFixit has full screw kits, but they are $60 and out of stock besides.

Thanks,

Tom.

Produto

MacBook Pro 15" Unibody (Mid 2010 - Mid 2012) Screw Set

$49.99

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

Postado: 27 de mai de 2011

Opções

I may be wrong but suspect it is a 3mm long Phillips screw and expect it's the same thread size as the longer (13mm) screws.

The screws appear to be a M2 thread with a #00 Philips head

EDIT

A quick search of eBay with "macbook screw A1286" shows a few kits for around $20.

HIH

Esta resposta foi útil?

Sim Não

Pontuação 2

3 comentários:

Richdave: this was very helpful, thanks! I'm pretty sure you are right about the size. I ordered some 3.5mm screws and will provide an update once they arrive.

Thanks again!

27 de mai de 2011 por Tom Smith

How did you make out?

3 de ago de 2011 por Tim Baker

My long-overdue update: the screws I ordered worked fine.

4 de ago de 2011 por Tom Smith

Adicionar um comentário

MacBook Pro 15" Unibody Early 2011

Need one replacement (short) screw for bottom cover?

MacBook Pro 15" Unibody (Mid 2010 - Mid 2012) Screw Set

1 resposta

Adicionar a sua resposta