Ir para o conteúdo principal

Screen only works well with external display.

Screen goes dim without a connection to an external monitor. Works fine with an external monitor. By itself it sometimes works but will flicker every once in a while. Or it will just remain very dim. F2 key is unresponsive during these fits. Screen returns once external display is plugged in.

I have a new logic board and new battery installed. The display problem existed before this repair.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

Try to check the connection to the display may be they are rusty connectivity between the connection.

por

Adicionar um comentário

1 resposta

Solução escolhida

Flickering is quite often related to LVDS cable issues. If logic board was replaced I guess it was for a reason..if that involved liquid damage or image issues it’s likely cable was damaged and needs replacement too.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Mark Waddington será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 67