Ir para o conteúdo principal

Repair guides and support for top and front loading Whirlpool brand washers.

422 Perguntas Visualizar todos

Why does my washer stop at rinse cycle?

I have a whirlpool model wtw50000dw1. It will fill and wash but once it gets to the rinse cycle it acts like it wants to go through with the process then lid lock lights up and then rinse light starts blinking. My lid strike looks like it has been cracked-missing a piece off it. Would I need to replace the lid switch and lid Stine and this will solve my problem or is this something else like the actuator switch? Thanks.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

This can be caused by a failed lid switch or door strike.

https://www.repairclinic.com/PartDetail/...

1

https://www.repairclinic.com/PartDetail/...

Esta resposta foi útil?

Pontuação 1

5 comentários:

Purchased the door strike and that wasn’t the problem. Will be purchasing the lid switch now.

por

Can you tell me the one I need to purchase please? Thanks.

por

I wonder if it could be the timer

por

I have same issue. I replaced the door latch, which I have had to do in past, but didn't fix problem. I checked drain hoses too. Nothing

por

Adicionar um comentário

Adicionar a sua resposta

Jenni será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 9

Últimos 30 dias: 42

Duração total: 957