Released September 22, 2017. Model A1863, A1905. Available as GSM or CDMA / 64 or 256 GB / gold, silver, and space gray.

177 Perguntas Ver todas

Help identify iPhone 8 logic board components

I have an iPhone 8 that will not come on I’ve identified one of the components close to the battery port connector (RV3C002UN) but am having trouble identifying another component to its immediate left. A mirror/silver like chip was actually broken and without a schematic it is very difficult to identify. If anyone could possibly help it would be greatly appreciated.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

Comentários:

@blaked89 you can make this "the components close to the battery port connector"and "A mirror/silver like chip " a lot easire by posting a picture with the broken component marked. that way people like @refectio can probalby identify this in no time at all. Use this guide Adding images to an existing question to post some images.

por

Ok thanks, until recently I only read posts but I finally found an issue I could not find myself so I just had put the question out. So first post here. I could upload a picture tomorrow if the pads on the board but the component itself was more or less shattered. The schematic from Minho seems to be the one I’m looking for But I will certainly let everyone know once I find out. I didn’t read his post till after our shops close.

por

Adicionar um comentário

Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

Visite Nossa Loja

1 Solução

Resposta Mais Útil

In general, a shiny glass component is usually a diode or a MOSFET. Check the screen capture of the iPhone 8 Plus schematic below. There is very little difference between regular and plus models on the basic circuitry.

Block Image

Esta resposta foi útil?

Pontuação 1

Comentários:

Thanks, I really appreciate it. I’ll look into it as soon as possible and let you know if I can find it.

por

So i believe it is a TVS but I dont want to post the number/name of the component until I am %100 sure that’s the component that was damaged. Customer is becoming anxious, not sure if I will still have the phone by the time the part comes in. Very fine time limit I am working with lol

Thank you so much for the information and schematic but I do not want to mislead anyone. Will have to update you when it is confirmed. I do apologize.

por

Were you ever able to identify the name of that shiny glass component?

por

Adicionar um comentário

Adicionar a sua resposta

Blaked89 será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 11

Todo: 95