Ir para o conteúdo principal

Home button is constant pressed after ifixit screen replacement

I recently purchased a replacement screen for my iphone 6s. After putting back all the parts, I noticed that the home button would always be pressed. I isolated the issue to the metal bracket which is behind the home button and bent it away from the button slightly as recommended in another thread. I even loosed the screws which hold the bracket down.

Unfortunately, the button seems to still be depressed once I tighten the pentalobe screws on the bottom of the phone. Was there a change to the ifixit screen which adjusted the spacing? What other options can I try?

Respondido! Ver a resposta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 0
Adicionar um comentário

1 Resposta

Solução escolhida

i would contact the warranty team. doing between 10-15 iphone screens a day, i have noticed a couple screens a week come in and do this. i send them back through my supplier for their warranty, and they replace them within the week. its usually just an issue with the milling.

Esta resposta foi útil?

Pontuação 0

Comentários:

Thanks! I will reach out to see how customer service will handle this.

por

Adicionar um comentário

Adicionar a sua resposta

P.Diddy será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 32