Ir para o conteúdo principal

Fourth generation of CDMA iPad 4. Available in 16, 32, or 64 GB models. Model Number A1460.

20 Perguntas Visualizar todos

Won't finish booting after replacing display

After replacing a broken display I get an apple when doing a force restart, but it does not finish booting. Unfortunately, I thought it was fixed when I saw the apple and went ahead and stuck the display to the device. Have I just wasted a day and a display?

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 0
Adicionar um comentário

2 respostas

Pergunta Mais Útil

Try triple clicking the home button in case of any accessibility features have been turned on.

It is most likely a faulty digitiser or it could be damaged due to squishing the ribbon cable between the iPad metal housing and digitiser.

Sometimes not plugged in fully if lucky, worst case is the connector for the touch screen being physically damaged.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

By plugging it in I now can get to the passcode entry point, but the touch screen does not accept any touch inputs.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Steve Mossbrook será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 30