Rep: 39
4
4
Greetings,
I tried using a PH000 but I cannot turn the screws. It strips them. Would a PH0000 be better? Or are the screws something else similar to phillips maybe? The screwdriver does not seem to fit deep enough.
Thanks
Esta é uma boa pergunta?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
I do these keyboard replacements a couple of times a month. If you PH 000 is a cheap one or worn one it will slip. I use a small black and decker electric screw driver. On problem ones, I use a bit handle with a large diameter so I can put more torque on it and press hard as I turn. I’ve never stripped one.
Esta resposta foi útil?
Thank you. What brand of bit do you use? And is it magnetic? It makes putting screws in much easier. I also have a Black and Decker electric screwdriver. I need a quality PH000 bit.
I use the ones out of the iFixit kits.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 317
