6 
1 Why Is My Phone Stuck on Boot Loop After Liquid Damage?
Hi, first of all I would like to say I'm not looking for simple answers, i.e - hard reset, disconnect / reconnect battery. I would like to know if anyone out there, all be a technical genius could answer my question and give me some pointers. Now I'm no professional at phone repairs but I've done a fair few to understand the basics. I've never done any IC soldering / repair nor can I due to lack of equipment.
Basically, my question is this: Why is my iPhone 6 stuck on a boot loop when plugged into mains power but will not turn on independently via usb to pc or by it's own battery (new battery). The phone I believe has suffered water damage and after inspecting the pcb I noticed a scorch mark on the lower part of the board's shield. I have no idea what IC's to look at or what areas to look at first.
I've noticed that some of those IC's have suffered some damage and I believe maybe some of the board's ceramic caps are missing / damaged. I only have a soldering iron and a conventional multimeter, so any starting point would be good.
Any information regarding that would be great. Thanks.
Esta é uma boa pergunta?
44 