Rep: 37
3
When hooked up to a dc power supply. My adapter shows the exact voltage that the power supply is putting out. If i load it with 16.5 volts when checked with a multimeter when it's not connected to a mac it shows 16.5 volts. Is this normal or is it supposed to be 6 volts then 16.5 volts when a load is applied? It's magsafe 1 L type connector. The connector sense is 1.7 volts.
Esta é uma boa pergunta?
Rep: 37
3
Apparantly when connected via dc power supply it is always outputting 16.5 volts to the charger tip. However when connected via the apple psu block it looks like it supplys 5 volts then exactly 1 second later it ramps it up to 16-18 volts to avoid sparks.
Esta resposta foi útil?
Rep: 478,9 mil
35
329
970
Review this article: Macbook charger teardown: The surprising complexity inside Apple's power adapter it should help explain things.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 3
Últimos 30 dias: 5
Duração total: 976
