Ir para o conteúdo principal

Replaced iPhone 6S Plus charging assembly

Hello, I recently replaced the charging and auxiliary port assembly on my iPhone 6s plus using third party replacements parts. After replacement, the charging port works (the reason I replaced to begin with) however my auxiliary port plays out only the right half of the output. Is this due to a loose connector or faulty part? I've already tried wiggling the aux cord around to try and get contact for full audio but I don't even hear a partial buzz to indicate it's possible. Thanks!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

Hello!

Chances are the part is faulty. Aftermarket chargeports have a high defect rate, as so many functions are controlled by this flex. I recommend purchasing an original flex off ebay that was pulled from a working iphone. I've never had any issues with a used original part.

Esta resposta foi útil?

Pontuação 1

2 comentários:

%#*@! I had guessed that was the case, I didn't even know their was a market for used parts though so I'll look into it, thanks man!

por

No problem! Doesn't hurt to double check and make sure your aux cord works fine with other devices

por

Adicionar um comentário

Adicionar a sua resposta

Solomon DellaPenna será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 74