After getting my screen replaced, my phone screen is risen too much

My phone screen got replaced today and the screen isn’t flat when you look at it from the side. Is there any way I could just push the screen in without cracking it again?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3 Soluções

Solução escolhida

yes here i dont know i this is too technical or not but heres what i found: screen-size: 5.5inch (139.7mm)

Resolution:1080 x 1920.

depth:7.3mm (0.29inch)

height:158.2mm (6.23inch)

weight:188g (6.63oz)

width:77.9mm (3.07inch)

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

I don't think you can push it in without breaking it again. What I would do is go back to where you got the screen fixed, tell them the problem and see if they can fix it. But if you can show me a pic of it from the side I might be able to help you more.

Esta resposta foi útil?

Pontuação 0

Comentários:

I’m sorry I can’t post a picture but I may just be paranoid and think my phone screen is raised too much. Do you know where I could find the measurements for an iPhone?

por

HI,

I have the same problem after replaced my screen. The screen doesn't work properly so I ordered replacement screen from iFixit. After I installed iFixit's screen, it also risen too much and I had to press hard on the screen to activate 3D Touch. Do you think the mechanist broke my phone?

por

No. Your phone is fine. Your screen is aftermarket not Original.

por

Adicionar um comentário

It's most likely a aftermarket part that is why it is a little thicker than the orignal.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

BTSGarbage será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 68