Ir para o conteúdo principal

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

92 Perguntas Visualizar todos

My PSP GO was bricked!

What can i do to repair it(Blue screen of Death)?

Flash0 / font accidentally deleted :(

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 2
1 comentário

Does it just boot to a blue screen?

por

Adicionar um comentário

3 respostas

Solução escolhida

Make sure your charger is plugged in and press the O button to repair and restore default settings.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário
Pergunta mais útil

If you are actually running a CFW on the PSP, than you should be able to boot it into recovery mode holding the right bumper, while turning it on. If you were using a HEN, and don't have a CFW installed, then you are kinda stuck with a brick, and might want to consider selling it for parts.

*EDIT* If you are using Custom FirmWare (CFW) and can boot the PSP into recovery mode, using the method above, and you can scroll over to Advanced>Toggle USB (flash0), connect it to your computer via USB, and replace the font file you deleted.

Esta resposta foi útil?

Pontuação 3

1 comentário:

CFW = Custom Firmware - HEN = Homebrew ENabler: Basically if you are running stock firmware you are not able to get around Sony's limitations it is a paper weight. Unless you have CSW, Flash0 / font accidentally deleted :( = paper weight

por

Adicionar um comentário

I concur with ABCellars.

To clear BSOD try pressing o

The PSP will then attempt to repair itself by re--installing default settings to flash.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

LORD MK será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 13

Duração total: 13,417