Rep: 4,1 mil
30
30
22
Hi I’m wondering if a a full height graphics card can fit in this iMac. And now not a PCIE x16. I’m blanking on what Slot this iMac has? So can this take a 4GB graphics card? The Specs of this iMac is on my profile.
Esta é uma boa pergunta?
Rep: 478,9 mil
35
329
970
You system has a MXM slot for a custom video card. Its either a ATI Radeon HD 5670 w/512 MB video RAM (Apple P/N 661-5578) or a ATI Radeon HD 5750 w/1 GB video RAM (Apple P/N 661-5579). Apple never offered anything larger for this series and you need to use their board as it has custom firmware.
Here's a useful link: Wikipedia - Mobile PCI Express Module
Esta resposta foi útil?
@danj Hmmm. Is there any way to install the custom firmware to a different MXM?
I currently have a ATI Radeon HD 5750 1GB.
You still have a limit on what boards you can use. Between what Apple has drivers for and the heat sink needs to fit.
That why I’m asking on this what’s the highest card that it will take. What drivers does Apple have and what to those drivers work on.
The card is a fixed size (check the link I gave you) The Drivers are based on what Apple sold. Look at EveryMac at the different boards. You'll need to open your system to measure it. I don't force fit other MXM boards on the most part.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 199
2 comentários
Oh that’s it MXM3 right? Or MXM2?
por Padraic Hoselton
@danj you got a answer for me? I now that your good at this stuff.
por Padraic Hoselton