Ir para o conteúdo principal

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

217 Perguntas Visualizar todos

Reconnect ribbon cable assembly

Instructions say to reverse disassembly steps. Step in question says to "flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board ... Pull the headphone jack assembly cable straight out of its socket on the logic board."

How do I push the cable ends back under the retaining flaps? They do not slide back under easily and I do not want to damage the cable.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

Ah the digitizer touch screen ribbon cable, I use a bit of masking tape to guide it into the ZIF connector slot.

You can alternatively use your nail on the wavy line indent which you should see on the cable to push it in. Don't push down on the cable of course so you don't pinch it.

Esta resposta foi útil?

Pontuação 4
Adicionar um comentário

Adicionar a sua resposta

Stephen Svoboda será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 147