Ir para o conteúdo principal

Quinta Geração do Iphone. A Reparação deste dispositivo é correta, requer ferramentas especificas e paciência. GSM/CDMA/16, 32 OR 64 GB/Black or White.

2189 Perguntas Visualizar todos

After replacing the power cable screen flickers, but only during calls

I followed the guide to replace the power/sensor cable and everything apart for one minor detail seems to be fine now.

In the process the only other thing I did was to replace the battery.

The outcome is a fully functional iPhone 4S (tested cameras, WiFi, mobile telephony as well as internet). But whenever a call is received or placed, the screen which shows, among other things, the button to hang up, to enable loudspeakers etc, flickers.

The flickering only happens during calls (no matter whether incoming or outgoing).

What gives? Can anyone point out a specific reason why this would happen (and of course a remedy)?

For now I am considering this more of a cosmetic issue. During a call it rarely matters if the screen flickers (except when using the dial pad to enter further digits during a hotline call).

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

The proximity sensor is on the power button ribbon cable assembly. Either that is not mounted properly or is faulty.

I have marked it in red here:

Block Image

Esta resposta foi útil?

Pontuação 3

3 comentários:

And that sensor, if defective, could cause the symptoms?

por

Usually they don't work at all when faulty.

It's either blocked by something or not mounted properly

por

Thank you! I'll see if I can make out any blockage and perhaps order a replacement if I can't.

por

Adicionar um comentário

Adicionar a sua resposta

Access Denied será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 41