Opções

Battery exploded, is the board damaged?

Hello Everyone,

I had a problem while fixing my friends iphone 6, as the battery was a bad one, and it exploaded during the action. Luckily, only the sim card plastic tray was burnt as I was able to see in addition to the fcp connector of the screen and front camera as they got out of thir places. My question is, would it work if I solder an fcp connector to the board? and what is the most recommended liquid flux to be used?

please zoom in. here are better quality photos

zoom in

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

3 comentários

can you post photos of the board

5 de jan de 2018 por daniel

Please post pictures of the board for us to identify issues with the phone.

5 de jan de 2018 por Charlie B

here are some photos of it, thank you very much each and every one of you for the help. @refectio is there any video that you recommend me watching just to ensure im good enough to do it?

5 de jan de 2018 por Nart Al-Sherqatli

Adicionar um comentário

Postado: 5 de jan de 2018

Opções

You can replace FPC connectors but it's not as easy as it looks. You have to balance heat, solder and plastic all at once and if you make a wrong move, you will have a curled up molten mess of FPC :>).

As for flux, any good quality flux will do, the paste kind generally works better than liquid. You can use Amtech, Quick, MG Chemicals etc. Preferably the NO-CLEAN variety.

Esta resposta foi útil?

Sim Não

Pontuação 1

1 comentário:

Oh my, that board has had a rough day!

You should practice on a dead board first to see how it goes. Videos won't help much although I'm sure Jessa or Jason (STS) have some videos.

5 de jan de 2018 por Minho

Adicionar um comentário

iPhone xr

Battery exploded, is the board damaged?

Update (01/05/2018)

Update (01/05/2018)

Update (01/05/2018)

Update (01/05/2018)

Update (01/05/2018)

1 resposta

Adicionar a sua resposta