Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1435 Perguntas Ver todas

Why my MacBook doesn't detect MagSafe charger?

Hi,

i have a problem with my black 13" MacBook. Sometimes MacBook didn't detect MagSafe charger. I say didn't because it doesn't charge my MacBook now.

When i connected adapter to my laptop green led doesn't bright. Other times it charged, but now it can't. With the battery it works perfectly, but i don't have other MacBook to charge battery in it.

I try with other charger without results. I think it could be DC-IN or Logic Board. I try DC-IN with a multimeter, and pins one and five are connected, second and fourth also and the center pin it's not connected to other pins. Without battery laptop doesn't power-on, because charger isn't detected.

I would be very gratefully about any help.

Thanks

Regards

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 Solução

Solução escolhida

Pins 1 and 5 are grounds. Here's the pin out: http://en.wikipedia.org/wiki/MagSafe

Check the AC adapter to see if the pins are extending and if they are charged. If it's OK then I would replace the MagSafe port. Here's how to do that: MacBook Core 2 Duo Magsafe Board Replacement

Esta resposta foi útil?

Pontuação 2

Comentários:

Thanks for your response. I'm pending to receive a DC-In board, when i tried it i post if it solve my problem.

Regards

por

Solved. I changed the DC-In board and Macbook charges perfectly.

Thanks :)

por

Glad I could be of assistance.

por

Adicionar um comentário

Adicionar a sua resposta

josuku será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 13

Todo: 4,426