Ir para o conteúdo principal

Versão renovada do iPhone 3G com velocidades de processamento mais rápidas. O reparo deste dispositivo é semelhante ao do 3G e requer simples chaves de fenda e ferramentas de abertura. Modelo A1303 / 8 GB,16 GB ou 32 GB de capacidade / Parte traseira em plástico preto ou branco.

1500 Perguntas Visualizar todos

replaced glass digitizer, still does not work

i bought this from amazon.com to replace a digitizer that wasnt responding to any touch, and after replacing it it still doesnt work. i dont have a working 3gs to swap parts and compare with, so what im wondering is if this was just a case of really cheap manufacturing and getting a dud replacement, or if there is something wrong with the motherboard? thanks!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
1 comentário

just tried kitkash's idea, no dice unfortunately :(

por

Adicionar um comentário

1 resposta

Solução escolhida

I had a similar problem with my 3G.

What I did was peel of the small piece of sticky foam from the old digitiser cable and place it on the new one (it didnt come with any).

This pressed the cable onto the motherboard slightly and allowed all the contacts to connect.

Hope this helps!

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Ty Yamasaki será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 2,551