Screen does not turn on at all (tried replacing charging port as well)

Question

iPhone xr

4994 Perguntas Visualizar todos

robert7kim7 @robert7kim7

Rep: 1

Postado: 19 de set de 2017

Opções

Screen does not turn on at all (tried replacing charging port as well)

I had replaced my sister's battery recently as it was starting to lose its charge very quickly. However, in a month or so, she comes back with a broken phone that does not turn on or is recognizable to itunes either.

She told me she had used a portable fan that plugs into the bottom of the phone (a cheap chinese brand I think) which I speculated is what caused the damage to the phone. What do you guys think? Or, it's just coincidence and happened to died right after.

But anyways, so I thought it was the charging port that broke. So I replaced that, and still no luck. Also, tried hard resetting as well. If you guys could give any ideas on this, that'd be incredible!

Thanks,

Robert

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

3 respostas

Solução escolhida

Minho @refectio

Rep: 221,4 mil

Refectio - Mail-in Micro-Soldering Repairs & Data Recovery

15

289

806

Postado: 19 de set de 2017

Opções

You're probably right. Cheap peripherals can draw too much current or cause voltage spikes that damage the charging circuit (Tristar).

This will have to be repaired by a shop that does micro-soldering work.

Esta resposta foi útil?

Sim Não

Pontuação 3

5 comentários:

Thank you for the response. How much do you think it would cost to repair that?

19 de set de 2017 por robert7kim7

Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point

19 de set de 2017 por Minho

@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know.

19 de set de 2017 por Minho

Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right?

19 de set de 2017 por mayer

@refectio @mayer looks good to me as well.

19 de set de 2017 por oldturkey03

Adicionar um comentário

Thank you for the response. How much do you think it would cost to repair that? — robert7kim7
Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point — Minho
@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know. — Minho
Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right? — mayer

joel rakich @ripper Rep: 257 4 1 · Answer 1 · 2017-09-19T17:45:39-07:00

joel rakich @ripper

Rep: 257

4

1

Postado: 19 de set de 2017

Opções

Have you checked voltage on the battery? Maybe the new battery was junk and died already, especially if it was an ebay part. Use a multi meter on the outer pins of the battery connector. Report back what you find.

Esta resposta foi útil?

Sim Não

Pontuação 1

1 comentário:

Good point !

19 de set de 2017 por Minho

Adicionar um comentário