Can't open iPhone 7 to save my life please help!

The adhesive on these is very strong because of waterproofing. Try clipping the screen back in and use the method that is not the iSclack method.

EDIT: Did you remove the pentalobe screws?

At Simple Computer Repair in Monument, Colorado, We have opened a number of iPhone 7's. The adhesive is definitely strong. We use a Kobalt heat gun on the edges. Start at the bottom (left side of the home button. We heat the bottom and left side first. We use a single edge razor blade inserted vertically between the phone case and the screen. We then gently pry up on the screen until it begins to separate. We then run the razor blade along the side releasing the adhesive. We use opening picks to hold the screen open and keep it from re-adhering as we work along the edge. Don't put too much of the razor blade in, especially along the right side so as not to cut the home button cable. Once you get through the adhesive, remember that the iPhone 7 opens like a book, not bottom to top. Good luck.

I would say there is no way to open this phone without damaging the paintwork. If you use metals tools you WILL scratch the surface and possibly chip the fine edge on the glass. All the videos show the phones coming apart really easily, but they are a total con. The adhesive makes it really hard to move, even when warmed up.

I am happy to be contradicted on this, but nobody has filmed a genuine phone being opened for the FIRST time using this method.