Ir para o conteúdo principal

Repair guides and support for 21.5" Intel iMacs by Apple.

2127 Perguntas Visualizar todos

Black screen after resetting PRAM

Hello

I have iMac 21" 2011, it is working fine till yesterday. I was trying to boot it from USB but failed. After that I went to try a lot of options and read a lot of articles. One of them suggested resetting PRAM. I did reset PRAM and that was the end of my iMac. After resetting PRAM I only get black screen. I hear the startup chime and the keyboard is functioning and I hear sound when I click on it.

What to do now, I never though that resetting PRAM can destroy then device

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
2 comentários

Is very odd the PRAM reset killed your machine. What was the exact procedure you have done? In which way the boot from usb failed?

por

Please give us the model number and EMC number located on the botton side of the iMac stand.

por

Adicionar um comentário

2 respostas

Pergunta mais útil

Please give us the model number and EMC number located on the botton side of the iMac stand. Hook it up to an external monitor and see if the GPU is generating a video signal. Why were you trying to boot from an external USB, what was going wrong?

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Hi everyone

EMC 2428

Model 21" mid 2011

I went for a workshop. The guy said it is GPU issue and he fix it using heat treatment .

Now the system is loading but after the loading page it goes to black screen

I just got fed up and for proving it, I asked him to do PRAM setting and after that the issue returned

My conclusion is that I need to buy new one instead of fixing it

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Yamani será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 690