Rep: 129
6
9
Hello Guys
Macbook Pro Retina A1502
COMPLETELY DEAD
No water damage, it simply didn't turn on again.
MagSafe is working normally.
However I think I should go over the power rails to fix this BOARD, right?
Is there anyone that can me give the next steps here?
Esta é uma boa pergunta?
Rep: 3,3 mil
17
15
9
Find power aliass on your schematic, start testing power rails, I would start with pp3v3_g3h. You will want to use process of elimination, by that I mean find what power rails you have and what are missing, then work your way backwards to find the source of the issue. Remember when testing rails don't go from A to Z, start with point A then test point Z , then point B then point y and so on till you find the issue.
Esta resposta foi útil?
Still looking for your answer about REMOTE logic board repair tutoring.
Anyways.
I will go A to Z, cause at NOW my mind cannot understand why go to Z if B, C or D can give me the wrong voltage for example.
I mean, by logic, if B is an ISSUE the rest of the BOARD will be giving me wrong values. I guess so!
Forza if possible reach me by WhatsApp +55 53 9 9705 9883
Thanks!
Últimas 24 horas: 0
Últimos 7 dias: 1
Últimos 30 dias: 4
Duração total: 594
