Ir para o conteúdo principal
Pergunta encerrada

Replacing Capacitors

Hello all,

I am replacing 2 bad capacitors in my 17" iMac G5 and was wondering if they have to be the exact 6.3v 1800uf. I read on another site that the volts could be 10v as long as it is a 1800uf. Is this correct? Or should I just stick to the same specs.

Thank you in advance,

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

2 respostas

Solução escolhida

Hi,

the important spec is the 1800µF. You can use any voltage of 6.3V and above.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

It is very important to get low ESR replacements

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 2,052