My touch id stopped working . How to fix ripped cable?

I have the original lcd shield and home button to iphone i had the screens switched and the repairman ripped the home buttons flex cable from the connector and button itself can i fix it?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 2
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3 Soluções

Solução escolhida

If the home button cable itself is ripped, the only way to have the Touch ID function work again is to have Apple replace it. A replacement home button will give you home button functionality but not Touch ID. If it's just the extension cable that's on the thermal plate that is damaged, that can easily be replaced and will restore home button and Touch ID functionality.

Esta resposta foi útil?

Pontuação 2

Comentários:

Thanks. Very helpful

por

Adicionar um comentário
Resposta Mais Útil

Hi Ty S,

Here is a guide on how to do the replacement. You may have to have the repair done by Apple in order to keep the touchID feature.

Esta resposta foi útil?

Pontuação 3
Adicionar um comentário

If the cable was damaged by the one who repaired the phone then have the repair done by that repair guy . Anything I break while repairing a phone I fix as it should be with all repairs . The home button can be replaced but the touch function has to be done by Apple

Esta resposta foi útil?

Pontuação 3
Adicionar um comentário

Adicionar a sua resposta

Ty S será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 3

Todo: 126