Ir para o conteúdo principal

Just dead, no shorts anywhere

So this 6s plus is just dead. Had water damage, removed all shorts, board started smoking, shorted vccmain to ground, fixed that. Vccmain on diode mode says 803, no short. But ppgpu and ppcpu show a very low reading like 008 or even 003. Is this thing beyond fixing? Vccmain is normal, I had to take the audio codec off since it was shorted. Would that prevented it from being recognized by iTunes? It also generates no heat at all, anywhere.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1

3 comentários:

Hi Giga. How did you fare with this phone? Is it working? Have you probed it some more?

por

I actually sent this phone back to the ebay seller since it was not the one i ordered; i recived a phone with a destroyed screen and ordered one with a working one.

por

@refectio if you want to see if they relisted it the ebay seller is rcparlington and i got it for $70

por

Adicionar um comentário

1 resposta

The logic board is shorted out and I recommend you replace the entire phone.

Esta resposta foi útil?

Pontuação -1

1 comentário:

This isnt very helpful.

por

Adicionar um comentário

Adicionar a sua resposta

Gigabit87898 será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 134